Start with the equipment class, not the label
Metal-clad and metal-enclosed are not simply two names for the same enclosure. Both refer to metal-enclosed electrical equipment, but metal-clad switchgear is a more specifically defined construction category. In common industry usage, metal-clad equipment includes grounded metal barriers that separate major components, such as the bus, switching devices, and cable terminations. The exact construction and requirements depend on the applicable standard and the design being specified.
Metal-enclosed switchgear is a broader term for assemblies housed in metal enclosures. It can describe equipment with different internal arrangements and degrees of separation. The phrase alone does not establish the voltage class, interrupting capability, access provisions, listing, or intended application. A comparison is useful only after the project team identifies the equipment class and confirms what the specification means by each term.
How construction terminology relates to standards
Applicable standards distinguish equipment categories by design and intended use; enclosure material alone does not establish that an assembly is metal-clad. In medium-voltage projects, the specification may call for metal-clad switchgear, metal-enclosed switchgear, or another defined assembly type. The responsible engineer should identify the governing standard, edition, and required construction features, then verify that the proposed design fits those requirements.
Do not transfer terms across voltage classes without checking the equipment’s actual classification. A 5 kV or 15 kV class product is medium voltage; a 480 V class product is low voltage. Low-voltage switchboards are a separate product category, not automatically metal-clad or medium-voltage switchgear. UL 891 may apply to eligible low-voltage switchboards, but applicability and the assembly’s listing must be verified for the specific design. It is not a blanket requirement for every switchgear assembly.
Compare function, access, and configuration
Rather than assuming one construction is universally superior, compare how each proposed assembly addresses the project’s electrical and operating needs. Review the one-line diagram, bus arrangement, switching and protective devices, cable entry and termination space, maintenance access, and available room dimensions. Ask which components are separated by grounded barriers, what access is required for inspection, and whether the arrangement matches the operating and safety procedures established by the facility’s qualified personnel.
Construction can affect layout, cable routing, access, and equipment footprint, but those outcomes are design-specific. Compare complete, similarly scoped proposals rather than category names alone. Confirm the actual ratings and configurations required by the system study and project engineer; do not assume that a label establishes a particular rating or performance level. Installation, testing, and maintenance plans should be developed by qualified personnel using applicable safety procedures.
Use a neutral decision framework
A practical comparison begins with the duty the equipment must perform. For example, a project engineer evaluating a medium-voltage distribution lineup may first require a particular equipment class and construction features, then compare compliant designs for feeder count, protective-device arrangement, incoming and outgoing cable paths, and available installation space. The example is a way to organize questions, not a recommendation that either category is right for every facility.
Build a side-by-side review around mandatory requirements and design choices. Mark each item as required, preferred, or unresolved: equipment class; system voltage and ratings; bus and circuit configuration; construction and barriers; indoor or outdoor arrangement, if applicable; access and clearances; and documentation or testing requirements. Resolve mandatory items with the responsible engineer before weighing preferences such as layout or future expansion provisions. If a proposal uses terminology differently from the project specification, request clarification in writing.
Information to settle before requesting equipment
A useful inquiry includes the project’s one-line diagram, system voltage, required equipment class, anticipated source and feeder arrangement, and the ratings established by the project’s engineering work. Provide available room dimensions, cable entry direction, termination needs, environmental conditions, and any site constraints that affect access or installation. Identify required protective devices, controls, metering, communications, and documentation where these have already been defined.
Also state the governing specifications and standards, preferred construction features, required submittal information, and project schedule. Separate confirmed requirements from open questions so the manufacturer can identify what needs engineering review. If a specification names metal-clad equipment, say so explicitly and ask the supplier to confirm how the offered assembly meets the stated class. Do not rely on a general product description to resolve a standards or application question.
Coordinate design, review, and delivery
Before purchase, align the project engineer, equipment manufacturer, installer, and other responsible parties on the proposed configuration and interfaces. Review drawings and submittals for device arrangement, dimensions, cable space, control connections, and site requirements. Confirm project-specific ratings, standards applicability, listing status where relevant, testing scope, availability, and delivery dates against the actual specification and supplied equipment; these details depend on the order and must be verified.
South Carolina Switchgear Builders manufactures new switchgear and switchboards to specification, with US-built equipment, all-American components, short lead times, and nationwide shipping; availability and actual lead times depend on the order and require confirmation. For a sound comparison, first establish the required equipment category, then assess documented designs against project needs. That sequence helps buyers and engineers reach a clear specification without treating metal-clad and metal-enclosed as interchangeable labels.