REQUEST A QUOTE

Engineering guidance for quality-sensitive facilities

Protective Relay Selection for Aerospace Manufacturing

A practical framework for coordinating protective relay requirements across aerospace manufacturing systems, from production and test loads to equipment procurement and phased facility changes.

POWER DISTRIBUTIONBUILT WITH PURPOSE
Electrical equipment loaded on a flatbed truck outdoors
Equipment photograph supplied for illustration.
THE DETAILS MATTERMade for the
work ahead.
MADE IN USAAmerican manufacturing
UL 891Switchboard standard reference

UL 891 is a switchboard standard, not a claim of certification. Confirm applicability and listing for each assembly.

01 / PROJECT INPUTS

The right details make the difference.

Start with the requirements that shape your equipment. Share what you know, and identify what needs discussion.

Discuss your project
PROJECT SPECIFICATIONSREFERENCE / 01
Information to share about your switchgear project
DetailWhat to share
EquipmentType of switchgear or distribution equipment needed
ElectricalRequired voltage, current, and fault-duty criteria
ConfigurationInstallation environment, space, and access requirements
DocumentationDrawings, schedules, applicable standards, and desired listings

Requirements and applicable listings depend on the specific project and equipment.

Protection planning across aerospace operations

Aerospace manufacturing facilities can combine precision production equipment, inspection and test systems, environmental controls, utilities, and process support loads. Their electrical requirements are not interchangeable: a production line may have different operating patterns and consequences of interruption than a laboratory test area or building service. Protective relay selection should begin with the facility’s actual distribution design and operating priorities, not a device catalog or a generic list of functions.

The responsible project engineer determines which circuits need protection, what faults or abnormal conditions must be detected, and how protective devices should interact. Relay selection supports that engineered scheme; it does not establish it by itself. A new switchgear or switchboard purchase therefore needs to reflect the project’s approved one-line diagram, equipment specifications, and coordination work. Requirements can differ between a new facility, a replacement lineup, and an expansion that connects to existing distribution.

Define operating priorities and system boundaries

Start by documenting the distribution boundary under consideration: incoming source, transformers, bus sections, feeders, tie breakers, and downstream equipment as applicable. Identify normal and alternate operating arrangements, including any source transfers or planned bus configurations. These details affect which devices see a fault and which settings or interlocks may be relevant. The engineer should confirm the actual system conditions and available fault information rather than assume that a nominal voltage alone is enough to choose relays.

For quality-sensitive production, discuss consequences of both unnecessary trips and failure to isolate a fault. A nuisance interruption may disrupt a process or require inspection before operations resume, while inadequate protection can expose equipment to damaging conditions. Those concerns call for a documented engineering balance, not simply the most sensitive setting or the greatest number of relay features. Facility operations, maintenance, process engineering, and electrical design stakeholders should agree on priorities and operating assumptions.

Match relay functions to the protection study

Relay functions should follow the protection study and the characteristics of the circuit being protected. Depending on the design, the engineer may evaluate overcurrent, ground-fault, voltage, frequency, or other functions. Not every function belongs on every feeder, and a relay’s capability does not prove that a particular function is required. Confirm the device’s application, available inputs, trip output, and interaction with breakers or other protective devices against the approved design.

Sensing inputs deserve equal attention. Specify the required current and voltage sensing sources, their ratios and connections where applicable, and the information needed to support the relay’s intended operation. Confirm compatibility among the relay, instrument transformers, breaker trip circuit, and control wiring. Control power also matters: the design team should state the source, acceptable range, monitoring needs, and response to loss of control power based on project requirements and device documentation.

Coordinate settings and phased facility changes

Settings should be developed and reviewed by qualified engineering personnel using the system study, equipment data, and manufacturer documentation. Coordination considers how devices respond across the distribution system so the intended portion can be isolated while upstream protection remains appropriately applied. Where production depends on continuity, review the consequences of alternative operating configurations, source transfers, or tie-breaker positions. The approved settings and assumptions should be controlled as project records rather than treated as informal field adjustments.

Phased upgrades create additional interfaces. A new lineup may connect to existing relays, breakers, transformers, or control schemes whose documentation is incomplete or whose settings have changed. Identify what must be verified before final design, who owns that verification, and how commissioning information will be returned to facility records. Any installation, testing, or maintenance should be performed by qualified personnel following applicable safety procedures; relay selection is not a basis for energized work.

Choose the equipment interface deliberately

Low-voltage switchgear may be one interface in an aerospace facility’s distribution plan, but it is not automatically the right equipment for every circuit or project. Confirm the specified voltage class, configuration, interrupting and withstand requirements, compartment arrangement, metering, control scheme, and environmental conditions with the project engineer. If a switchboard is being considered, distinguish it from switchgear in the specification and verify the applicable design requirements. Any listing, ratings, testing, or standards applicability must be confirmed for the actual assembly.

Relay requirements should be coordinated with the equipment supplier early enough to resolve physical and functional details. Provide device make and model only when the project has established them; otherwise, state required functions and interfaces without prematurely locking the design. Clarify whether relay programming, settings documentation, communication protocols, event records, or factory testing are required and available for the proposed configuration. Availability, delivery timing, and any project-specific capability should be confirmed against the final specification and order.

Prepare a useful engineering and purchasing package

Before requesting new equipment, assemble the latest one-line diagram, system voltage and source information, transformer and conductor data, fault-study inputs, and operating configurations. Include the protection study or identify who will produce it. Note loads with distinctive process consequences, planned expansion, existing device interfaces, required control power, and preferred documentation. Mark assumptions clearly, identify unresolved data, and assign an owner to confirm each item so the supplier can distinguish firm requirements from preliminary design intent.

Ask stakeholders to review the package: electrical engineering, facility operations, maintenance, process or quality leadership, and procurement may each identify a different constraint. For phased work, describe the expected boundary between new and existing equipment and the records needed at handover. South Carolina Switchgear Builders manufactures new equipment custom to specification, with US-built equipment and nationwide shipping; configuration, standards, availability, and actual lead times depend on the order and require confirmation. A clear, engineer-reviewed scope gives the purchasing team a sound basis for comparing proposals and coordinating the next design decisions.

03 / START A CONVERSATION

Let’s talk about your project.

Tell us what you’re working on and the details you have so far. You can include drawings and other documents in your email.

Prefer to call? (951) 403-5738

Email sales: saleselectricalbuyers@gmail.com

PROJECT INQUIRY01 — 04

* Required fields. This form opens your email application; send the prepared message there, or email us directly. You can also call (951) 403-5738.